0001356: Ideas for DoomSeeker IRC

Chat on our Discord Server Get the latest version: 3.2
Source Code

View Revisions: Issue #1356		[ All Revisions ] [ Back to Issue ]
Summary	0001356: Ideas for DoomSeeker IRC

Revision	2014-11-26 21:45 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] Subtask 1738: At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-11-26 19:45 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] Subtask 1738: At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-11-24 19:18 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] Subtask 1738: At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-11-23 19:39 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] Subtask 1738: At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-11-23 19:28 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] Subtask 1738: At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-11-23 18:52 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] Subtask 1738: At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-03-22 12:27 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] Subtask 1738: At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-03-11 22:20 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-03-09 22:58 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-03-09 18:56 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Subtask 1740: Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2014-03-09 18:56 by Zalewa
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' 0001740 Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Revision	2013-06-05 04:59 by amiga600
Description	I'd like to see the Connection Dialog made simpler, and have all the relevant options there, in a similar fashion to ZRC, example:'http://puu.sh/38EAu.png [^]' Please also support Numeric 005 (Server Support) and read the PREFIX= line and support all modes given, for example PREFIX=~&@%+(qaohv) - note there are some weird IRC networks which have weird modes, for example PREFIX=(yxqaohv)~&!@%+ on irc.ntalk.de - Generally, If you support anything the server throws at you in PREFIX= this will make your IRC Client future proof, as almost all IRC servers throw PREFIX= support out in Numeric 005, If PREFIX= is not recieved, I'd assume PREFIX=@%+(ohv) as you are more than likely safe with that. The following IRC Numerics should be forwarded to the channel window, as opposed to being shown in Status tab, as they give out vital information: "{482} [Nick] [#Test] [You're not channel operator]" and so on. 332: Channel Topic should be output into the Channel as opposed to Status. 333: Topic Setby/Time, Example: "channelname > Set By [user] on $asctime($4) Whois data: Numerics 311,379,378,307,319,312,320,317,318 could be forwarded to current channel window. Numeric 317 is idle time/connection date The rightclick menus could have a Whois option (/whois) and based on the PREFIX= have levels of operator, eg "Owner/Protect/Op/HalfOp/Voice" and the unset equivalents. An Ignore option on the rightclick menus, possibly even a popup box where you can add users either via "nick!@" or "!*@host" and so on. If you are not a channel operator, rather than fading out "OP/Halfop/Voice etc", if self-op does not work (/mode [chan] +o [nick]), then attempt to use services, for example: /ChanServ OP [chan] [selected-nick] At the moment CTCP commands do not work, if they are not going to be added, possibly a way to stop them opening a message window up with the command inside, eg currently it opens up a PM window. Userlist issue, when clicking a name it turns orange, when you click off the userlist, the orange highlight does not disappear, would be good if that could be removed. Option to color users in list/channel by Operator Symbol, eg ~Purple &Yellow @Red %Green +Blue [modeless]Grey and possibly an Idler option? Possibly Away checking on channels with less than 200 users in (this is done via /WHO #channel, and 7th row on is modes, G=Away H=Here)

Questions or other issues? Contact Us.

Links

Doom and Doom II are the property of id Software.