no weapon sway or view bobbing?

Discuss all aspects related to modding Zandronum here.
Post Reply
Rcj8993
Forum Regular
Posts: 137
Joined: Wed Sep 18, 2013 10:17 pm

no weapon sway or view bobbing?

#1

Post by Rcj8993 » Mon Jan 05, 2015 10:58 pm

so im messing around with stacked sectors and for some reason my weapons do not sway not does the view bob like doom and doom II

https://www.mediafire.com/?m1y6mrsg6eep01i

did i do something?

ive tested this with the test option and ive opened it in zandronum

and its not the settings for either as ive opened both doom and Doom II and they work as they should :/

any suggestions?
as just looking like you slide around is kinda stupid imho

its like the Doom Guy is sliding on ice.
Last edited by Rcj8993 on Mon Jan 05, 2015 11:10 pm, edited 1 time in total.
Capstone.Wad

My Computer Specs:
[spoiler]Intel i7 3770 3.4 Ghz processor,
16Gb (4 x 4gb) 1600 DDR3 ram,
Inno3d GTX980 ULTRA,
Samsung 840 Evo 128gb SSD,
Seagate Barracuda 1tb and 3 tb HDD's
Asus P8Z77-V LK Motherboard.
Corsair 750 watt PSU (Modular)[/spoiler]

User avatar
Ænima
Addicted to Zandronum
Posts: 3583
Joined: Tue Jun 05, 2012 6:12 pm

RE: no weapon sway or view bobbing?

#2

Post by Ænima » Tue Jan 06, 2015 4:57 pm

It's because you're not on the floor of the sector. I'm not sure if bridge things behave the same way.
Reinforcements: midgame Survival joining/respawning
Doom64: Unabsolved: Doom64 + Diablo II
ZandroSkins: a pack made by our community
AeniPuffs: 3D blood and bullet puff effects, free to use for your own mods
Squad Radio: a WASD-based radio chat menu, add your own custom sounds!
Mercenaries (on hold)
Image

Rcj8993
Forum Regular
Posts: 137
Joined: Wed Sep 18, 2013 10:17 pm

RE: no weapon sway or view bobbing?

#3

Post by Rcj8993 » Tue Jan 06, 2015 7:56 pm

Ænima wrote: It's because you're not on the floor of the sector. I'm not sure if bridge things behave the same way.
im using bridges?

im just using 160:Sector_Set3dFloor

and it happens everywhere, even on areas with no stacked sectors.

ill look more into it, i heard if i stacked more than two sectors ontop of eachother i might run into an issue (not specified)

thanks, this gives me an idea on where to look.
Last edited by Rcj8993 on Tue Jan 06, 2015 7:58 pm, edited 1 time in total.
Capstone.Wad

My Computer Specs:
[spoiler]Intel i7 3770 3.4 Ghz processor,
16Gb (4 x 4gb) 1600 DDR3 ram,
Inno3d GTX980 ULTRA,
Samsung 840 Evo 128gb SSD,
Seagate Barracuda 1tb and 3 tb HDD's
Asus P8Z77-V LK Motherboard.
Corsair 750 watt PSU (Modular)[/spoiler]

User avatar
Ænima
Addicted to Zandronum
Posts: 3583
Joined: Tue Jun 05, 2012 6:12 pm

RE: no weapon sway or view bobbing?

#4

Post by Ænima » Tue Jan 06, 2015 8:13 pm

Then I have no clue. But if you want to see how the engine treats bobbing in regards to being grounded, turn the fly cheat on. Fly around for a bit, then slowly touch down like an airplane. You'll see what height you have to be at for the bobbing to start.

I have no clue where the source code is though.
Reinforcements: midgame Survival joining/respawning
Doom64: Unabsolved: Doom64 + Diablo II
ZandroSkins: a pack made by our community
AeniPuffs: 3D blood and bullet puff effects, free to use for your own mods
Squad Radio: a WASD-based radio chat menu, add your own custom sounds!
Mercenaries (on hold)
Image

Rcj8993
Forum Regular
Posts: 137
Joined: Wed Sep 18, 2013 10:17 pm

RE: no weapon sway or view bobbing?

#5

Post by Rcj8993 » Tue Jan 06, 2015 8:57 pm

Ænima wrote: Then I have no clue. But if you want to see how the engine treats bobbing in regards to being grounded, turn the fly cheat on. Fly around for a bit, then slowly touch down like an airplane. You'll see what height you have to be at for the bobbing to start.

I have no clue where the source code is though.

made a new sector separate from the others, and i still get it.
flying didnt change anything, no matter the height

i deleted all the 160 control sectors and it didnt fix it, so its not the stacked sectors
oh my god......

Fixed it... set all the zandronum settings to a hard reset... and it fixed it, turns out i have two zandronum's installed on my PC, one on my D Drive, one on my SSD, and the SSD one was fine :/
Last edited by Rcj8993 on Tue Jan 06, 2015 9:03 pm, edited 1 time in total.
Capstone.Wad

My Computer Specs:
[spoiler]Intel i7 3770 3.4 Ghz processor,
16Gb (4 x 4gb) 1600 DDR3 ram,
Inno3d GTX980 ULTRA,
Samsung 840 Evo 128gb SSD,
Seagate Barracuda 1tb and 3 tb HDD's
Asus P8Z77-V LK Motherboard.
Corsair 750 watt PSU (Modular)[/spoiler]

User avatar
Dark-Assassin
Maintenence Crew
Posts: 968
Joined: Fri May 25, 2012 4:25 am

RE: no weapon sway or view bobbing?

#6

Post by Dark-Assassin » Wed Jan 07, 2015 5:53 am

Sounds like your movebob setting was at 0
❗ Don't message me for technical or moderation support.
❔ Use the relevant support channels instead.

Rcj8993
Forum Regular
Posts: 137
Joined: Wed Sep 18, 2013 10:17 pm

RE: no weapon sway or view bobbing?

#7

Post by Rcj8993 » Sat Jan 17, 2015 2:14 am

luckily i fixed it, that was driving me so goddamn insane
Capstone.Wad

My Computer Specs:
[spoiler]Intel i7 3770 3.4 Ghz processor,
16Gb (4 x 4gb) 1600 DDR3 ram,
Inno3d GTX980 ULTRA,
Samsung 840 Evo 128gb SSD,
Seagate Barracuda 1tb and 3 tb HDD's
Asus P8Z77-V LK Motherboard.
Corsair 750 watt PSU (Modular)[/spoiler]

Post Reply