how to host a server public (only)

[ninjademon45]

hello!

i have a problem with host a server , when i start the server it just the ip came "10.0.0.1:10666" and thats l.a.n ip but i didn't click it lan just master server


thank you!

[KalFoxis]

when hosting a server it will normall show local to you. if you click master and it still shows it try checking your router to see if you are fowarding to the right port. or you can set your computer on DMZ so you won't have to deal with the port forwarding at all.

[Metal]

when hosting a server it will normall show local to you. if you click master and it still shows it try checking your router to see if you are fowarding to the right port. or you can set your computer on DMZ so you won't have to deal with the port forwarding at all.

This is terrible advice. I would advise that you do NOT enable DMZ on your router. All you need to do is open port 10666 UDP and you should be good to go. IF not, your firewall might be block ing it, you may want to allow an exception for Skulltag/Zandronum on your windows/anti-virus firewall to host.

[Watermelon]

hello!

i have a problem with host a server , when i start the server it just the ip came "10.0.0.1:10666" and thats l.a.n ip but i didn't click it lan just master server


thank you!

Check out my link for Best Ever

[ninjademon45]

and yeah my firewall is enabled "Eset personal firewall"

and i tried to enter my router where i must to go i??