Protected lump authentication failed on Raspberry Pi server
Posted: Wed Jan 13, 2021 10:19 pm
Trying to get zandronum-server running on a Raspberry Pi.
I used this repo:
https://github.com/doomjoshuaboy/zandronum-rpi
And built with:
The only iwad I'm loading is Doom 2 v1.9. I confirmed the md5 hash on both the client and the server and it matches.
My client is an x86-64 machine, but I would imagine that cpu arch differences hopefully wouldn't matter between client and server?
Client is running zandronum 3.0.1-r191013-1938 installed from Debian 10 repos.
I have a spare x86-64 machine to test with also, and I have confirmed that the client can connect to a server running on this machine with no problems.
I used this repo:
https://github.com/doomjoshuaboy/zandronum-rpi
And built with:
Code: Select all
mkdir build
cd build
cmake .. -DCMAKE_BUILD_TYPE=Release -DSERVERONLY=ON -DRELEASE_WITH_DEBUG_FILE=OFF
makeMy client is an x86-64 machine, but I would imagine that cpu arch differences hopefully wouldn't matter between client and server?
Client is running zandronum 3.0.1-r191013-1938 installed from Debian 10 repos.
I have a spare x86-64 machine to test with also, and I have confirmed that the client can connect to a server running on this machine with no problems.