Cant start a server (Dont Know Y)

General discussion of the port and Doom-related chat.
Post Reply
User avatar
Lord Haze
New User
Posts: 10
Joined: Wed Nov 28, 2012 2:26 am
Location: non of ur business
Clan: Delt@
Clan Tag: Delt@
Contact:

Cant start a server (Dont Know Y)

#1

Post by Lord Haze » Fri Jul 25, 2014 2:36 am

Followed all Steps to port fowarding and all that jazz iv got everthing in order but it still doesnt show up in server list.... and dont send me a link to ur zandronum pill thing allready took that into account and didnt help.



p.s dont know if this has anything to do with it but ill let yall have a crack at i wont give u last digit of my ip but ill get u a example of what my ip is.
my ipv4 shows up like this 10.0.0.*

also when i start the server the only thing that fails in the server log is Geoip



here is the log:
Unknown patch N5TECH04 in texture N5VTX056
Unknown patch N5TECH04 in texture N5VTX056
Unknown patch N5TECH04 in texture N5VTX056
Unknown patch N5SUBV1A in texture N5VTX057
Unknown patch N5SUBV1B in texture N5VTX057
Unknown patch N5WOOD01 in texture N5WOOD01
Texture N5WOOD01 is left without any patches
Unknown patch N5WOOD02 in texture N5WOOD02
Texture N5WOOD02 is left without any patches
Unknown patch N5WOOD03 in texture N5WOOD03
Texture N5WOOD03 is left without any patches
Unknown patch N5WOOD04 in texture N5WOOD04
Texture N5WOOD04 is left without any patches
Unknown patch N5WOOD05 in texture N5WOOD05
Texture N5WOOD05 is left without any patches
Unknown patch N5WOOD06 in texture N5WOOD06
Texture N5WOOD06 is left without any patches
Unknown patch N5WOOD07 in texture N5WOOD07
Texture N5WOOD07 is left without any patches
Unknown patch N5WOOD08 in texture N5WOOD08
Texture N5WOOD08 is left without any patches
Unknown patch N5WOOD09 in texture N5WOOD09
Texture N5WOOD09 is left without any patches
Unknown patch MARB1 in texture MARB1
Texture MARB1 is left without any patches
Unknown patch S1Z2A in texture S1Z2A
Texture S1Z2A is left without any patches
ParseTeamInfo: Load team definitions.
LoadActors: Load actor definitions.
Tried to register class 'SmallMudkip' more than once.
Tried to register class 'NoPlayerInSightTimer' more than once.
Tried to register class 'NewPlasmaBall' more than once.
Tried to register class 'smalljungle' more than once.
Tried to register class 'smallbush' more than once.
Tried to register class 'BigTree' more than once.
Tried to register class 'smalljungle' more than once.
Tried to register class 'smallbush' more than once.
Tried to register class 'NewStalagmite' more than once.
Tried to register class 'NewStalagmite' more than once.
Tried to register class 'smalljungle' more than once.
Tried to register class 'smallbush' more than once.
Tried to register class 'BigTree' more than once.
Tried to register class 'treesmall' more than once.
Tried to register class 'bush2' more than once.
Tried to register class 'smalljungle' more than once.
Tried to register class 'smallbush' more than once.
Tried to register class 'BigTree' more than once.
Tried to register class 'DoomPlayer' more than once.
Tried to register class 'JumpingDoomguy' more than once.
R_Init: Init Doom refresh subsystem.
DecalLibrary: Load decals.
Patch installed
Warning: SmallMudkip and SmallMudkip both have doomednum 24621.
Warning: smalljungle and smalljungle both have doomednum 9546.
Warning: smallbush and smallbush both have doomednum 9548.
Warning: smalljungle and smalljungle both have doomednum 9546.
Warning: smallbush and smallbush both have doomednum 9548.
Warning: NewStalagmite and NewStalagmite both have doomednum 9941.
Warning: NewStalagmite and NewStalagmite both have doomednum 9941.
Warning: smalljungle and smalljungle both have doomednum 9546.
Warning: smallbush and smallbush both have doomednum 9548.
Warning: BigTree and BigTree both have doomednum 9551.
Warning: treesmall and treesmall both have doomednum 3678.
Warning: bush2 and bush2 both have doomednum 3679.
Warning: smalljungle and smalljungle both have doomednum 9546.
Warning: smallbush and smallbush both have doomednum 9548.
Warning: BigTree and BigTree both have doomednum 9551.
PWO_LoadDefs: Loading PWO definitions...
M_Init: Init miscellaneous info.
P_Init: Init Playloop state.
ParseSBarInfo: Loading default status bar definition.
ParseSBarInfo: Loading custom status bar definition.
D_CheckNetGame: Checking network game status.
using alternate port 10780
player 1 of 1 (1 nodes)
Initializing network subsystem.
Server using alternate port 10780.
Winsock initialization succeeded!
IP address 10.0.0.7:10780
GeoIP initialization failed.
UDP Initialized.
ImageImage

User avatar
Tiger
Retired Staff / Community Team Member
Posts: 381
Joined: Thu May 31, 2012 6:21 am
Location: United States
Contact:

RE: Cant start a server (Dont Know Y)

#2

Post by Tiger » Fri Jul 25, 2014 3:10 am

You can drop the attitude for starters. If you want help, try being more 'neutral'.
Lord Haze wrote: Followed all Steps to port fowarding and all that jazz iv got everthing in order but it still doesnt show up in server list.... and dont send me a link to ur zandronum pill thing allready took that into account and didnt help.
Check the following and configure if needed:
  • Host firewall or Security Suite; it is possible that the in\out is being blocked from _a_ firewall software or some security software suite that is installed on your system.
  • Home Router firewall; relook at your home router's configuration and assure that the in\out bound TCP\IP protocol is set to UDP and with the correct port, which in your case is 10780 for this gameserver.

    Code: Select all

    Server using alternate port 10780.
  • Try using UPnP; to make life somewhat easier - and if it is possible, take advantage of the UPnP functionality on SkullTag\Zandronum.
Lord Haze wrote: p.s dont know if this has anything to do with it but ill let yall have a crack at i wont give u last digit of my ip but ill get u a example of what my ip is.
my ipv4 shows up like this 10.0.0.*
It really doesn't matter as you can manipulate the LAN IP or fetch a new IP from the DHCP... anyways, we already know your LAN IP and you provided that information for us willingly....

Code: Select all

IP address 10.0.0.7:10780
Last edited by Tiger on Fri Jul 25, 2014 3:13 am, edited 1 time in total.

User avatar
Lord Haze
New User
Posts: 10
Joined: Wed Nov 28, 2012 2:26 am
Location: non of ur business
Clan: Delt@
Clan Tag: Delt@
Contact:

RE: Cant start a server (Dont Know Y)

#3

Post by Lord Haze » Fri Jul 25, 2014 3:17 am

1st thanks for the info, second i didnt say that with an attitude maybe its u who has the attitude cuz i pretty sure i didnt write that with anger in mind thank u, maybe ur referring to me saying and i quote "don't send me the zandronum pill thing cuz i have already took that into account" that wasnt with attitude it was "fyi" sorry for me not classifying something that was obvious. and if that wasnt what portrayed my attitude then plz enlighten me, and it was my bad that i put my ip up and didnt notice so that was my fault.



now back to topic, my firewall is off so that cant be the problem.
how to use upnp on zandronum, i may know how to use it but im a worrying person for im afraid i might fuck up my router
Last edited by Lord Haze on Fri Jul 25, 2014 3:29 am, edited 1 time in total.
ImageImage

Arco
Retired Staff / Community Team Member
Posts: 69
Joined: Thu Jun 28, 2012 6:42 pm
Location: New York

RE: Cant start a server (Dont Know Y)

#4

Post by Arco » Fri Jul 25, 2014 3:42 am

You would have to open some of your ports from your router and direct Zandronum to use those corresponding ports, all of this is provided that you have access to your router.

See: http://wiki.zandronum.com/Port_Forwarding
Last edited by Arco on Fri Jul 25, 2014 10:15 pm, edited 1 time in total.
Image
When the weather changes, we will be lost. And no one will know who anyone is anymore.

mifu
Retired Staff / Community Team Member
Posts: 1075
Joined: Tue May 29, 2012 10:34 am
Location: Aussie Land
Clan: Demon RiderZ

RE: Cant start a server (Dont Know Y)

#5

Post by mifu » Fri Jul 25, 2014 3:44 am

You may need to enable UPnP functionality on your router. Are you able to give me your model of your router and I can tell you how to do it.
Image

User avatar
Lord Haze
New User
Posts: 10
Joined: Wed Nov 28, 2012 2:26 am
Location: non of ur business
Clan: Delt@
Clan Tag: Delt@
Contact:

RE: Cant start a server (Dont Know Y)

#6

Post by Lord Haze » Fri Jul 25, 2014 3:53 am

it is a netgear model WPN824v3 and my upnp is on
Last edited by Lord Haze on Fri Jul 25, 2014 4:00 am, edited 1 time in total.
ImageImage

User avatar
Tiger
Retired Staff / Community Team Member
Posts: 381
Joined: Thu May 31, 2012 6:21 am
Location: United States
Contact:

RE: Cant start a server (Dont Know Y)

#7

Post by Tiger » Fri Jul 25, 2014 7:12 am

Lord Haze wrote: now back to topic, my firewall is off so that cant be the problem.
Any reason why you deliberately choose to disable the firewall completely? All that you should need to do is simply add the zandronum.exe file to the exclusion list on your firewall or security software suit.
Lord Haze wrote: how to use upnp on zandronum, i may know how to use it but im a worrying person for im afraid i might fuck up my router
You are contradicting yourself. You are first asking how to use Zandronum's UPnP built-in functionality, but yet - you state that you already know how to use the UPnP built-in functionality. Can you please clarify?

User avatar
Lord Haze
New User
Posts: 10
Joined: Wed Nov 28, 2012 2:26 am
Location: non of ur business
Clan: Delt@
Clan Tag: Delt@
Contact:

RE: Cant start a server (Dont Know Y)

#8

Post by Lord Haze » Fri Jul 25, 2014 10:03 am

1st cuz thats my choice. 2nd why not just put not sure in between im and a of that quote and be done with it, and explain to me how to set it up SO that my server shows up if upnp is even my problem here or not, i dont know why u have to point out the mistakes in my writing why cant u just read in between the lines like everyone eles and be done with it because im pretty sure MAY means that im not sure 100% that i know how to use it anyway. Example: "i MAY go somewhere today" which means that....... im not sure yet if im going or not.
which in this case "i may know how to use it" but im not sure, which will also go with what i said after that sentence "but im a worrying person for i am afraid i might fuck up my router" meaning i dont want to fuck up my router if im not 100% sure that i know how to use it, so in turn im asking others for clarification.

BTW Ty to those who commented and didnt comment just to mark my mistakes in writting and just looked past that and "read in between the lines"
Tiger wrote: but yet - you state that you already know
p.s. i didnt say i knew about it i said "i may know" that is a whole different street corner than "i know"
ImageImage

User avatar
Tiger
Retired Staff / Community Team Member
Posts: 381
Joined: Thu May 31, 2012 6:21 am
Location: United States
Contact:

RE: Cant start a server (Dont Know Y)

#9

Post by Tiger » Sat Jul 26, 2014 6:16 am

Lord Haze wrote: 1st cuz thats my choice. 2nd why not just put not sure in between im and a of that quote and be done with it, and explain to me how to set it up SO that my server shows up if upnp is even my problem here or not, i dont know why u have to point out the mistakes in my writing why cant u just read in between the lines like everyone eles and be done with it because im pretty sure MAY means that im not sure 100% that i know how to use it anyway. Example: "i MAY go somewhere today" which means that....... im not sure yet if im going or not.
which in this case "i may know how to use it" but im not sure, which will also go with what i said after that sentence "but im a worrying person for i am afraid i might fuck up my router" meaning i dont want to fuck up my router if im not 100% sure that i know how to use it, so in turn im asking others for clarification.

BTW Ty to those who commented and didnt comment just to mark my mistakes in writting and just looked past that and "read in between the lines"
Tiger wrote: but yet - you state that you already know
p.s. i didnt say i knew about it i said "i may know" that is a whole different street corner than "i know"

Okay, good luck!

Post Reply