editors slade and slumped not starting due to errors
- mytis
- Retired Staff / Community Team Member
- Posts: 40
- Joined: Sat May 26, 2012 7:10 am
- Location: California
editors slade and slumped not starting due to errors
The error says the dll isn't there. It is.
Is now what I get when trying to start up slade 3. This is after I installed the C++ 2010 runtime, which is now on here with the 2005 one my computer already had. Before I had installed the C++ runtime I was getting two dll errors, which after each of the two was attended to, I got another error about a library from a dll not being readable (or something similar). My desktop's running windows ultimate 32-bit SP1.
Any solution's come to mind?
Last edited by mytis on Sun Jun 10, 2012 10:09 pm, edited 1 time in total.
RE: editors slade and slumped not starting due to errors
Can you post DLL sizes and creation dates?
𝕂𝕝𝕠𝕗𝕜𝕒𝕔
- mytis
- Retired Staff / Community Team Member
- Posts: 40
- Joined: Sat May 26, 2012 7:10 am
- Location: California
RE: editors slade and slumped not starting due to errors
I recently downloaded both from http://www.dll-files.com, msvcp100 is 421kb, msvcr100 is 808kb.
- Dark-Assassin
- Maintenence Crew
- Posts: 968
- Joined: Fri May 25, 2012 4:25 am
RE: editors slade and slumped not starting due to errors
Try installing these instead.
x86 (32-bit): http://www.microsoft.com/en-au/download ... px?id=5555
x64: http://www.microsoft.com/en-us/download ... x?id=14632
x86 (32-bit): http://www.microsoft.com/en-au/download ... px?id=5555
x64: http://www.microsoft.com/en-us/download ... x?id=14632
- mytis
- Retired Staff / Community Team Member
- Posts: 40
- Joined: Sat May 26, 2012 7:10 am
- Location: California
RE: editors slade and slumped not starting due to errors
I had installed that after adding the dll's alone hadn't worked. Just to be sure I installed it again, this is the resulting error of trying to run slade.
- Dark-Assassin
- Maintenence Crew
- Posts: 968
- Joined: Fri May 25, 2012 4:25 am
RE: editors slade and slumped not starting due to errors
Remember to remove the DLLs from your Slade dir, as it tries to read them first.
- mytis
- Retired Staff / Community Team Member
- Posts: 40
- Joined: Sat May 26, 2012 7:10 am
- Location: California
RE: editors slade and slumped not starting due to errors
Alright, I've removed the DLLs from the directory and restarted the computer. The error is unchanged.